KNOG

KNOG Mr. Chips Front Bicycle Light

Sold out
  • KNOG Mr. Chips Front Bicycle Light-Bicycle Lights-KNOG-Voltaire Cycles of Highlands Ranch Colorado
KNOG Mr. Chips Front Bicycle Light-Bicycle Lights-KNOG-Voltaire Cycles of Highlands Ranch Colorado KNOG Mr. Chips Front Bicycle Light-Bicycle Lights-KNOG-Voltaire Cycles of Highlands Ranch Colorado KNOG Mr. Chips Front Bicycle Light-Bicycle Lights-KNOG-Voltaire Cycles of Highlands Ranch Colorado KNOG Mr. Chips Front Bicycle Light-Bicycle Lights-KNOG-Voltaire Cycles of Highlands Ranch Colorado

KNOG

KNOG Mr. Chips Front Bicycle Light

Sold out

Description

KNOG Mr. Chips Front Bicycle Light

By incorporating Chips On Board (COB) LED tech the USB rechargeable Mr Chips rear bike light give off a superior glow with 120° visibility, making sure you are seen not just from the rear, but from the side too. With long runtimes and a lumen output of 44 lumens Mr Chips ensures you are well seen from at least 1.2 km away, day and night. Comes with 3x rear interchangeable straps so you can swap these lights between bikes with different sized seatposts – including aero seatposts and oversize bars.

  • Choice of beam angle and intensity
  • Visible at over 1 mile
  • Integrated USB recharge plug
  • 100% waterproof and dustproof
  • Interchangeable silicone strap 3 sizes
  • Aero strap (rear) 
  • Li-Po battery
  • Low battery indicator

mr chips burn times
FUNCTION : Rear Bike Light
LIGHT OUTPUT : 44 lumens
DIMENSIONS : 42 x 42 x 62mm 
WEIGHT : 35g

 

STORAGE MODE:

To activate storage mode make sure light is first turned off. Then hold down the on/off button for 5 seconds and release when red LED comes on. This LED will stay lit until the light drops into storage mode. 

To reactivate light, plug into USB port and charge as usual. Once charged light will turn on as before.

CHARGING:

When plugging the light into a USB port to charge a red LED will display on the on/off switch of the light to indicate that the light is charging. When fully charged this light will turn green to indicate charging is complete. 

DOWNLOAD PRODUCT INSTRUCTIONS